Gold Mining Equipment Vibrating Screen with Gold Carpet

General Description

VGM-200 is a complete, portable equipment.

Each machine is a complete portable plant; there is no need for additional screens or sluice boxes! At the top is an extremely heavy duty grizzly bar section that will take up to 24 inches rocks ( ca. 610mm). Classification begins when the material is placed on the grizzly bars, and high-pressure water separates the sub-1” (25.4 mm) material from the large rocks. Then the screen deck further classifies the material, and sub-.25 ” (6.35 mm) material drops into the sluice boxes, remaining sub-1” material passes through the nugget trap into the final.

The sluice can be adjusted for the front and rear angles, left and right balance to achieve maximum recovery rate by adapting to different terrain and operating conditions.

This gold processing machine is easy to operate and efficient. The gold mat can be taken down quickly for flushing. This machine can be cleaned easily and quickly, gold mat can be removed to flush quickly. The machine is fully driven by hydraulic system. The system is driven directly by hydraulic motor. No belt or chain is required. This means that a lot of driving mechanism is not necessary. Hydraulic system can reduce fuel consumption and mechanical loss.

Advantage and Feature 

1. This plant is a complete portable plant, no need for additional screens or sluice boxes.
2. It's 100% hydraulic drive, no electric needed, the hydraulic system is USA DANFOSS.
3. The three sluice boxes are independently adjustable, adapt rubber mat inside, gold recovery exceeds 95%, fine gold down to 200-300 mesh.
4. Equipped with world-famous rubber mat that is designed for superior gold recovery.
5. The engine is Japan Yanmar, bearing is Japan NSK.
6. Long service life and low cost for maintenance.

Specifications