Double Wet Pan Mill Wheel Dressing Gold Grinding Mill Machine

General Description

The gold stone grinding mill is mainly used to separate gold, silver, lead, zinc, iron, molybdenum, copper, antimony, ect. It performs an excellent job in secondary crushing, finely crushing and super finely crushing. It grinds ores by wheel driving force. Firstly, the power is transferred from the motor to the reducer, then to the horizontal shaft, and finally to the grinding wheel. the wheels then rotate anticlockwise.The wheels can revolve around the vertical shaft of the pan mill, and at the same time, it can revolve on its own axis, while the grinding base will remain still.
The grinding wheels mix up the ores and water evenly, and produce ore pulp. The ores are pressed, rubbed and grinded repeatedly. After the grinding process, the monomers are taken to the upper surface of the pulp and discharged through the overflow outlet of the water basin. Meanwhile, the coarse ores sink to the bottom of grinding base, being grinded continuously till they reach the required fineness. The screening mesh set up at the overflow outlet of the water basin classifies the ore fineness strictly to avoid the over-grinding and uneven fineness, which helps create better condition for next working process.

Packaging term: nude cargo or wooden case.

Advantage and Feature

1.simultaneously reduce lifting surface area.After grinding wheels rotation, the intensity of pressure on minerals increases, reaching the purpose of increasing output(not less than 150t per 24hrs)
2.On the basis of original equipment,a scraper device is added to keep material layer 4-5 cm.Only under this state,swaying effect is excellent.In addition,fine material can be quickly cleaned away from mill groove.

Specifications